The Pirate Trading Co.

500338
 
Windlass Steelcrafts®
 
This historically accurate cutlass is replicated from a type used by the Dutch East India Co., but its like could be found across the seven seas. It must be stressed that no design rules applied to the early cutlass, and they took several forms. Our version features a slightly curved wood grip married to a gracefully formed knuckle guard and a steel shell on a long, effective blade. Includes scabbard. Made by Windlass Steelcrafts®.
Overall: 33-1/2"
Blade: 28" long, 1-1/2" wide. 3/16" thick
Wt: 2 lbs/10 oz
$235.00

Pirate Captain's Hanger
500968
 
Windlass Steelcrafts®
 
The Pirate Captain's Hanger is made of beautiful antiqued brass and has a steel hilt. The fully tempered high carbon steel blade is worth its salt against any seabeast or while swarming the side of a galley. Your pirate captain’s costume is incomplete without this hanger. Made by Windlass Steelcrafts®. Can be sharpened for additional fee.
Overall: 32 1/2"
Blade: 26" long, 1 1/8" wide, 3/16" thick
Wt: 2 lbs
$175.00

Sharpening Service $18.00 

Pirate Cutlass
500160
 
 
Windlass Steelcrafts®
 
Many a bloody-handed pirate of the 17th century clambered over the side of a gold laden galleon armed with a cutlass such as this. Known by many names, "hanger", "cuttoe," and "short saber" by infantry or "cutlass" by sailors, this was an exceedingly popular short weapon. The steel basket protected the hand and could be used as an armored fist in the close confines of shipboard combat. High carbon steel blade made by Windlass Steelcrafts®. Steel pommel and leather-covered wood handle. Includes leather scabbard.
Overall: 28 1/2"
Blade: 22 1/2" long, 2" wide
Wt: 2 lbs/10 oz
$235.00
 

Pirate King Cutlass
500964
 
 
Windlass Steelcrafts®
 
Features a high carbon steel, hand forged blade, well tempered and with full tang as it was meant to be. The menacing cup guard is pierced through with fearsome skull & cross-bones. Grip is wood covered with leather and wire. The steel hilt and scabbard parts are artificially aged as if pulled from the darkest depths of Davey Jones' locker. Can be sharpened for additional fee.
Overall: 32 3⁄4"
Blade: 25 3⁄4" long, 1 7⁄8" wide, 3⁄16" thick
Wt: 2 lbs/6 oz
$255.00

Sharpening Service $18.00

Pirate Plug Bayonet
402526
 
 
Windlass Steelcrafts®
 
All kinds of weapons found their way onto pirate ships, as long as they were good weapons. This plug bayonet served a double role. It made a very effective fighting dagger with its long, wide blade, but in a pinch it could be fit in the barrel of a musket to make a short pike. The antiqued brass parts are in the form of angels and the grip is turned hardwood. The blade has a cut-out cross and comes to a keen point. Includes sheath that will fit up to a 4" belt. Made by Windlass Steelcrafts®.
Overall: 15 3/8"
Blade: 9" long, 1 1/2" wide, 3/16" thick
Wt: 10 oz

 

$95.00

Sharpening Service $18.00

Pirate's Companion Sword
500180
 
 
Windlass Steelcrafts®
 
Where would the seafaring rogue be without his trusty cutlass? This stout sword is made to be as rugged as the originals. High carbon steel blade. Gorgeous brass basket and nice hardwood grip. No need to sail the high seas in search of ill-gotten riches; this beauty is a treasure in itself. Made by Windlass Steelcrafts®. ($5 addl. s/h) Can be sharpened for additional fee.
Overall: 32"
Blade:26" long
Wt: 2 lbs
$185.00

Scimitar
500822
 
 
Windlass Steelcrafts®
 
The original scimitar was called a shamshir, (which meant "lion's tail") and had a deeply curved blade that was almost a half circle. Developed in Persia, this type of blade was effective for drawcuts, but other than that, of limited utility. This caused the blade to shift its shape into a more useful version, which we have chosen to copy. Blade is quite effective, being able to drawcut as well as slash, and the point is quite useful in the "hooking" thrust often used. Made from high carbon steel by Windlass Steelcrafts®. Grip is wood, and the guard and scabbard furniture are steel. Complete with scabbard. A beautiful and romantic sword. Copied from the Hank Reinhardt collection. Can be sharpened for additional fee.
Overall: 36"
Blade: 30-1⁄2" long, 1-1⁄8" wide, 3⁄16" thick
Wt: 1 lb/8 oz
$235.00

Scottish Cutlass
500920
 
 
Windlass Steelcrafts®
 
The crashing of waves, the roar of cannons, the shout of sea roques through the foreboding mist - this new cutlass can't help but unleash adventurous images. Scottish born Capt. William Kidd, we're sure, would have favored this sword. As seen in period art, the Scottish Basket-Hilt was at times married to a cutlass blade (this one has a double edge for the first 9" of the blade). The basket itself provided excellent hand protection and could deliver a hard blow in the crowded melee that ensued onboard. Made by Windlass Steelcrafts®. Includes scabbard. $3.00 additonal Shipping & Handling charge with item. Can be sharpened for additional fee.
Overall: 31-1/2"
Blade: 25" long, 2-1/8" wide. 3/16" thick
Wt: 3 lbs/4 oz

$265.00

Sharpening Service $18.00